Product brand
Related Products
Quick View
FLAME ROD – OVENPAK 2
MAXON rectification rods (flame rods) have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
DOWNLOADS:
Quick View
SPARK IGNITOR – OVENPAK 2
MAXON spark ignitors have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
Quick View
MOTOR BRACKET – OVENPAK 2
MAXON Connecting brackets and linkage assemblies are available in 4 main versions:
- Maxon SMARTLINK DS drive motors.
- Honeywell MODUTROL drive motors.
- Honeywell HERCULINE drive motors.
- Barber-Colemand drive motors.
Special assemblies can also be engineering upon request.
Quick View
MAXON OBSERVATION GLASS – SQUARE – OVENPAK 1
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
FIRING SLEEVE – OVENPAK 2
MAXON firing sleeves are available in 5 versions:
- Standard sleeve is 8″ long, made of #310 SS, and is suitable for downstream temperatures up to 1000°F (538°C).
- For higher velocities, specify 12″ long sleeve made of #310 SS for downstream temperatures up to 1000°F (538°C).
- For higher downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 8″ long, #RA 330 SS sleeve.
- For higher velocities and downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 12″ long, #RA 330 SS sleeve.
- For refractory lined furnaces, specify 8"" refractory lined sleeve. "
Quick View
HOUSING GASKET – OVENPAK 2
MAXON housing gasket is to be installed between the two (2) main casing sections of the burner. Designed to provide an airtight seal between the casing pieces, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
FILTER ELEMENTS – OVENPACK 2
MAXON red foam filters allow for the removal of particulates from the combustion air stream. The filters are specifically designed for the combustion industry and include a flame retardant to ensure safe operation in a variety of applications.
Quick View
GAS NOZZLE – OVENPAK 2
MAXON gas nozzles are designed for the most rugged industrial applications. Engineered to develop a stable and high turndown flame pattern, nozzles are available for
- NATURAL GAS
- PROPANE
- BUTANE
All nozzles are also available with nickel coating for higly corrosive environments.
Quick View
FIRING SLEEVE – OVENPAK 1
MAXON firing sleeves are available in 5 versions:
- Standard sleeve is 8″ long, made of #310 SS, and is suitable for downstream temperatures up to 1000°F (538°C).
- For higher velocities, specify 12″ long sleeve made of #310 SS for downstream temperatures up to 1000°F (538°C).
- For higher downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 8″ long, #RA 330 SS sleeve.
- For higher velocities and downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 12″ long, #RA 330 SS sleeve.
- For refractory lined furnaces, specify 8"" refractory lined sleeve. "
Quick View
BURNER SLEEVE GASKET – OVENPAK 1
MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.